TIMKEN Feb-20 Tapered Roller Bearings

J:105 mm; E:25 mm; d:60 mm; Recommended tightening torque for set screw:22 Nm; N:M16; Dz:120 mm; H2:138 mm; Designation of housing:PG212N-; G:M6x1; Designation of open end cover:SCO212-60;

RoHS:6; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Volume Discount:Available; Bearing Part Number:6200; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Shape:Flange Type; Holder Surface Treatment:Clear Anodize;

C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; Db - Cup Backface Backing Diameter:59.94 mm; da - Cone Frontface Backing Diameter:40.89 mm; B:22.385 mm; e - ISO Factor8:0.38; Cup Part Number:14283; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):18; C0 - Static R

G:R1/8"; d:30 mm; Recommended tightening torque for set screw:5.5 Nm; H1:17 mm; J:118 mm; B:38.1 mm; T max.:100 °C; A1:25 mm; H2:82 mm; Designation of bearing:UC206G2;

Shape:Flange Type; Width T(mm):11; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Bearing Retained:No; Bearing Part Number:6002; Number of Bearings:Single; Seals:ZZ (Double Shield); Volume Discount:Available;

Shape:Flange Type; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing I.D. d(mm):15; RoHS:6; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; Number of Bearings:Double;

Type:Ball; Max. Allowed rpm(rpm):4200; D:150; Inner/Outer Ring Material:Steel; Size Standards:Metric System; d:85; Specifications/Environment:Standard; Rolling Element Material:Steel; Days to Ship:9 Days or more; Size Standards:Metric System;

Height H(mm):30 ～ 50; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; RoHS:6; Type:Bearings with Housin; Width T(mm):19; Number of Bearings:Single; Bearing I.D. d(mm):20; Bearing Retained:Yes (with retaining;

Days to Ship:7 Days; Flange O.D. H(φ):47; Width T(mm):10; Bearing Part Number:628; Bearing Retained:No; Bearing Material:[Steel] Steel; Volume Discount:Available; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):8; Shape:Flange Type;

Bearing Unit, Type:Pillow Type; Unit Body Material:Cast Iron; Stroke:No; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Unit Body Material:Cast Iron; RoHS:6; Basic Load Rating, Static Rating(N):17800; Pillow Type, Category:Standard;

Characteristic cage frequency, FTF:0.47 Hz; C0r:223 kN; F:95 mm; Nlim (grease):2,800 rpm; s max:1.5 mm; Nlim (oil):4,200 rpm; Lw:28 mm; Cr:108 kN; Radial clearance class:CN; rs min:1 mm;

Bearing Unit, Type:Pillow Type; Bearing Unit, Type:Pillow Type; Unit, Type:Insert Bearing Unit; Seal:Silicone; Unit, Type:Insert Bearing Unit; d:40; RoHS:6; Pillow Type, Category:Thick Wall; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel;

Note:This product line wa; Bearing UPC:013992034649; Dimension J2:24.0 in; Bearing Number:MSM320BX; Shaft Size:320 mm; Dimension K:8.3 in; Series Type:Medium Series; Seal Type:High Temperature Pac; Cor - Static Load Rating:656892 lbf; Dimension J1:32.0 in;

m:5.5 mm; D:62 mm; C0:11.2 kN; B:38.1 mm; C:19 mm; G:1/4-28UNF; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; T min.:-40 °C;

B:38 mm; Fatigue limit load, Cu:4.3 kN; Min operating temperature, Tmin:-40 °C; d1:133 mm; f0:14.4; Characteristic outer ring frequency, BPF0:4.09 Hz; Static load, C0:118 kN; da min:121 mm; Characteristic rolling element frequency, BSF:5.31 Hz; ra max:2 mm;